|
The Low Country Mud Rats are all about our members
and their Jeeps (Rigs). To help identify each other
we have created this page of photos. If you see one
of us on the road, wave. If you see another Jeep not
on this page, stop and introduce yourself and invite
them to the next meeting.
|
|
Handle:
scampbell53
Name: Steven Campbell Rig: 1990 XJ Specs: 6" long arm on 38.5" Swamper TSL / SXs 5.0 ford / AOD trans / Flipped Dana 300 Front and rear high pinion 60s, 5:13 gears Detroit Lockers Onboard air and welder Full cage |
Handle:
2BNDRT
Name: Steve Clavel Rig: 1992 YJ Specs: 4.0L~AX15~NP231 crawlbox/Dana 300~Twin sticked~CV drive shafts~Ford 9" front axle,lock-rite,SOA w/stock YJ spring & extra leaf~Ford 8.8 rear axle w/ Aussie locker, SOA w/Explorer springs~ 4.10 gears~37x12.5x17 BFG Krawlers on 17x9 Rock Crawler rims~Shackle reversal~Wheelbase streached to 105". RCI fuel cell~ Ramsey REP8000, 6 point roll cage, rocker protection. |
Handle:
BBadMonkey
Name: Randall Edge Rig: 2000 TJ Sport Specs: 33x12.50 BFG MT KM's open D30, Trac-Lok'd D44 rear w/3.73's. stock NV3550/NP231J 3" Tera coils, Warn XD9000i, Homebrew front swaybar disco's, TK sliders, Tecumseh OBA, Custom bumpers. |
Handle:
poorwd
Name: Nathan Focht Rig: 1993 XJ Specs: 3.5" lift 31x10.5x15 MT's Custom Winch Bumper Front/Rear Lock-Right Lockers Skid Row Engine/TC/Tank armor Custom Rock Rails Rear Disc Conversion |
Handle:
packerjeep
Name: Brian Packer Rig: 1993 YJ Specs: 5 speed, 4.0 High Output, 4" Skyjacker suspension lift, 1.5" Body lift, M.O.R.E. greasable boomerang shackles, 35" BFG Mud Terrains on 10" Eagle alloys, Warn 9.5 ti with roller fairlead, Tomken rear bumper with Warn 2" receiver shackle, Racing seats, 4 point harnesses and roll cage, Advanced Adaptors slip yolk eliminator with CV drive shaft, 4:10 gears, Large beverage cooler, And finally...padded O-Shit handles |
Handle:
cccj
Name: Brian Smit Rig: 1983 CJ7 Specs: 4.0L HO, AW4 trans, Dana 30 front with 4.88s, ARB locker and Superior axle shafts, Scout Dana 44 rear with .88s, welded carrier and disc brakes, F150 leaf springs, wheelbase stretched 8", 37" BFG Krawlers, 17" Lincoln Navigator wheels, full custom cage, 5 point harnesses, Warn HS9500 winch |
Handle:
mikes21
Name: Mike Smith Rig: 1988 Wagoneer Ltd Specs: 2" inch lift 30x9.50 tires Rock lizard guards Rock It air charge |
Handle:
teufel
Name: Rick Thompson Rig: 1997 TJ 4.0 Sport Specs: RE 4.5 Super Flex lift, 1" Daystar body Lift, 1" More Torsion Motor Mounts, 32x11.5 BFG MT KM, 15x8 Cragar 342 Black Rockcrawler, D30 Open 4.56, 8.8 locked 4.56, NP231 w/Advance Adapters SYE, Tom Woods Custom CV Driveshafts, Warn Rock Crawler bumpers/TC, Warn winch plate, Warn 9.5ti, Toys by Troy Rock Sliders, Tuffy Overhead Console, ARB Safari Snorkel, Lots of other gadgets |
Handle:
ahooligan2u
Name: Hank Rig: Specs: 2.5" rancho lift, rancho steering stabilizer, 15x10 eagle alloys, 33x12.50x15 Ddakota AT's, KC Daylighters, round l.e.d., flush mount tail lights |
Handle:
Name: Gary Brown Rig: 1991 Renegade Specs: BDS 4" lift and 35" procomp tires |
Handle:
Name: Toly Siamos Rig: 1992 YJ Specs: 33 inch Firestone MTRs |
Handle:DanShores
Name:Dan Shores Rig:1989 YJ Specs: 35x12.50 on shiny rims, 1' body lift, 4" spring lift, locked d30 & d35 with 4.10s, 9000 winch, and other junk... |
Handle:airjeep4x4
Name: Brent Harris Rig: 1978 CJ-7 Specs: Sittin' on 36x13.5 IROKs with 2.5" lift SOA, wheelbase extended 6" Driveway Paint job and tub liner Small Block Chevy, Quadrajet carb, HEI ignition Centerforce clutch running stock t-150 3 speed Dana 20 T-case with tera-low 3.15 kit Wilwood master cylinders and hydraulic clutch linkage Full home-bent cage to frame rails with suspended seating Hand-drilled rotors, homemade rear disk brakes Line locks, front and rear, rear proportioning valve Full width 44's running 4.56's detroit rear, spool front Rancho adjustable 9-way 10" shocks Tom Wood's driveshafts Warn alloy fronts, CTMs, Dutchman rear alloys Home-piped ram assist York on-board air with 3 gallon tank |
Handle: lvladie
Name: Tracy Hall Rig: 1996 Grand Cherokee Limited Specs: 5.2 ltr, AWD (4W/D). Its stock as far as suspension. I got an custom intake and i didnt have exhaust in the pic but now i've got a flowmaster with duels and 3.5 inch tips |
Handle:bonestock
Name: John Takats Rig: 2003 TJ Specs: all bone stock |
Handle: Nicole Name:
Nicole Yates
Rig: 1980 CJ7 Specs:"It's a Show Jeep..." |